BSC adjustable nipple driver – 3.6 mm square drive – DS-3.6S
Adjustable nipple drivers improve the wheel building process, by allowing wheels to be laced with greater speed and accuracy. This DS-3.6S adjustable nipple drivers installs 3.6mm double square drive nipples to a uniform depth of thread. Please note this driver is designed for Pillar’s 13 gauge 3.6 mm double square nipples, and is not compatible with 3.2 mm square nipples. This tool is extremely useful when working with internal nipples where it is impossible to visually check that the spoke threads are set at an even depth of thread. With a pre-set depth you can consistently bring your wheels to a low working tension before starting the process of truing. This nipple driver has an internal pin which allows for 7mm of adjustment.
This driver can be easily attached to an electric drill, with either a standard chuck or a ¼” (6.35 mm) hex bit holder. It can also be used manually with either a ¼” hex bit holder or bit holding screwdriver.
Details:
DS-3.6S has 50 mm of workable length and a 6mm diameter shaft for use in most rims
Includes a spare set screw (M3) and pin
The pin length is adjusted using a 1.5mm hex key and minimal torque - do not overtighten
Material: stainless steel
Made in the UK
Adjustable nipple drivers improve the wheel building process, by allowing wheels to be laced with greater speed and accuracy. This DS-3.6S adjustable nipple drivers installs 3.6mm double square drive nipples to a uniform depth of thread. Please note this driver is designed for Pillar’s 13 gauge 3.6 mm double square nipples, and is not compatible with 3.2 mm square nipples. This tool is extremely useful when working with internal nipples where it is impossible to visually check that the spoke threads are set at an even depth of thread. With a pre-set depth you can consistently bring your wheels to a low working tension before starting the process of truing. This nipple driver has an internal pin which allows for 7mm of adjustment.
This driver can be easily attached to an electric drill, with either a standard chuck or a ¼” (6.35 mm) hex bit holder. It can also be used manually with either a ¼” hex bit holder or bit holding screwdriver.
Details:
DS-3.6S has 50 mm of workable length and a 6mm diameter shaft for use in most rims
Includes a spare set screw (M3) and pin
The pin length is adjusted using a 1.5mm hex key and minimal torque - do not overtighten
Material: stainless steel
Made in the UK
Adjustable nipple drivers improve the wheel building process, by allowing wheels to be laced with greater speed and accuracy. This DS-3.6S adjustable nipple drivers installs 3.6mm double square drive nipples to a uniform depth of thread. Please note this driver is designed for Pillar’s 13 gauge 3.6 mm double square nipples, and is not compatible with 3.2 mm square nipples. This tool is extremely useful when working with internal nipples where it is impossible to visually check that the spoke threads are set at an even depth of thread. With a pre-set depth you can consistently bring your wheels to a low working tension before starting the process of truing. This nipple driver has an internal pin which allows for 7mm of adjustment.
This driver can be easily attached to an electric drill, with either a standard chuck or a ¼” (6.35 mm) hex bit holder. It can also be used manually with either a ¼” hex bit holder or bit holding screwdriver.
Details:
DS-3.6S has 50 mm of workable length and a 6mm diameter shaft for use in most rims
Includes a spare set screw (M3) and pin
The pin length is adjusted using a 1.5mm hex key and minimal torque - do not overtighten
Material: stainless steel
Made in the UK