BSC adjustable nipple driver - slotted back LONG - SB-1
Adjustable nipple drivers improve the wheel building process, by allowing wheels to be laced with greater speed and accuracy. The SB-1 adjustable nipple driver installs slotted back/standard nipples to a uniform depth of thread. With a pre-set depth you can consistently bring your wheels to a low working tension before starting the process of truing. This nipple driver has an internal pin which allows for 7mm of adjustment.
This tool is perfect for deep-profile rims. It is 115 mm long and has a usable depth of up to 90 mm. It can be easily attached to an electric drill, with either a standard chuck or a ¼” (6.35 mm) hex bit holder. It can also be used manually with either a ¼” hex bit holder or bit holding screwdriver.
Details:
- Adjustable up to 7mm with supplied insert (1.8 mm), suitable for all nipple sizes
- 90 mm long workable length, 6mm diameter shaft for use in most rims
- 115 mm total length
- For use in drills with a ¼” (6.35 mm) hex shank
- Supplied with spare insert pin and set screw
- Material: stainless steel
Adjustable nipple drivers improve the wheel building process, by allowing wheels to be laced with greater speed and accuracy. The SB-1 adjustable nipple driver installs slotted back/standard nipples to a uniform depth of thread. With a pre-set depth you can consistently bring your wheels to a low working tension before starting the process of truing. This nipple driver has an internal pin which allows for 7mm of adjustment.
This tool is perfect for deep-profile rims. It is 115 mm long and has a usable depth of up to 90 mm. It can be easily attached to an electric drill, with either a standard chuck or a ¼” (6.35 mm) hex bit holder. It can also be used manually with either a ¼” hex bit holder or bit holding screwdriver.
Details:
- Adjustable up to 7mm with supplied insert (1.8 mm), suitable for all nipple sizes
- 90 mm long workable length, 6mm diameter shaft for use in most rims
- 115 mm total length
- For use in drills with a ¼” (6.35 mm) hex shank
- Supplied with spare insert pin and set screw
- Material: stainless steel
Adjustable nipple drivers improve the wheel building process, by allowing wheels to be laced with greater speed and accuracy. The SB-1 adjustable nipple driver installs slotted back/standard nipples to a uniform depth of thread. With a pre-set depth you can consistently bring your wheels to a low working tension before starting the process of truing. This nipple driver has an internal pin which allows for 7mm of adjustment.
This tool is perfect for deep-profile rims. It is 115 mm long and has a usable depth of up to 90 mm. It can be easily attached to an electric drill, with either a standard chuck or a ¼” (6.35 mm) hex bit holder. It can also be used manually with either a ¼” hex bit holder or bit holding screwdriver.
Details:
- Adjustable up to 7mm with supplied insert (1.8 mm), suitable for all nipple sizes
- 90 mm long workable length, 6mm diameter shaft for use in most rims
- 115 mm total length
- For use in drills with a ¼” (6.35 mm) hex shank
- Supplied with spare insert pin and set screw
- Material: stainless steel