Pillar Wing 14G (PSR Wing 21) – J-bend – 271-272 mm – Black
Pillar’s PSR Wing spokes are an aerodynamic performance spoke made with high quality T302+ stainless steel. The distinctive shape of the spoke’s mid-section is inspired by aircraft nose cones, and is designed to reduce turbulence and drag as the spoke moves through the air stream.
A unique feature of Pillar’s PSR spokes is the increased diameter of the spoke elbow to 2.2 mm. This increase in cross-sectional area improves strength at the elbow and allows for a tighter fit at the hub flange.
Note on use:
Please note that a bladed spoke holding tool is required to work with these spokes. DT Swiss’ 1.0-1.3 mm bladed spoke holder is a good choice for these spokes.
Product details
Colour: Black
Material: T302+ Stainless Steel
Thread gauge: 14 gauge
Diameter along the spoke: 2.2 mm - 2.1x1.3 mm – 2.0 mm
Thread pitch: 56 TPI
Type: J-Bend
Pillar’s PSR Wing spokes are an aerodynamic performance spoke made with high quality T302+ stainless steel. The distinctive shape of the spoke’s mid-section is inspired by aircraft nose cones, and is designed to reduce turbulence and drag as the spoke moves through the air stream.
A unique feature of Pillar’s PSR spokes is the increased diameter of the spoke elbow to 2.2 mm. This increase in cross-sectional area improves strength at the elbow and allows for a tighter fit at the hub flange.
Note on use:
Please note that a bladed spoke holding tool is required to work with these spokes. DT Swiss’ 1.0-1.3 mm bladed spoke holder is a good choice for these spokes.
Product details
Colour: Black
Material: T302+ Stainless Steel
Thread gauge: 14 gauge
Diameter along the spoke: 2.2 mm - 2.1x1.3 mm – 2.0 mm
Thread pitch: 56 TPI
Type: J-Bend
Pillar’s PSR Wing spokes are an aerodynamic performance spoke made with high quality T302+ stainless steel. The distinctive shape of the spoke’s mid-section is inspired by aircraft nose cones, and is designed to reduce turbulence and drag as the spoke moves through the air stream.
A unique feature of Pillar’s PSR spokes is the increased diameter of the spoke elbow to 2.2 mm. This increase in cross-sectional area improves strength at the elbow and allows for a tighter fit at the hub flange.
Note on use:
Please note that a bladed spoke holding tool is required to work with these spokes. DT Swiss’ 1.0-1.3 mm bladed spoke holder is a good choice for these spokes.
Product details
Colour: Black
Material: T302+ Stainless Steel
Thread gauge: 14 gauge
Diameter along the spoke: 2.2 mm - 2.1x1.3 mm – 2.0 mm
Thread pitch: 56 TPI
Type: J-Bend