Pillar Wing 14G (PSR Wing 21) – J-bend – 285-286 mm – Black
Pillar’s PSR Wing spokes are an aerodynamic performance spoke made with high quality T302+ stainless steel. The distinctive shape of the spoke’s mid-section is inspired by aircraft nose cones, and is designed to reduce turbulence and drag as the spoke moves through the air stream.
A unique feature of Pillar’s PSR spokes is the increased diameter of the spoke elbow to 2.2 mm. This increase in cross-sectional area improves strength at the elbow and allows for a tighter fit at the hub flange.
Note on use:
Please note that a bladed spoke holding tool is required to work with these spokes. DT Swiss’ 1.0-1.3 mm bladed spoke holder is a good choice for these spokes.
Product details
Colour: Black
Material: T302+ Stainless Steel
Thread gauge: 14 gauge
Diameter along the spoke: 2.2 mm - 2.1x1.3 mm – 2.0 mm
Thread pitch: 56 TPI, 14G
Type: J-Bend
Please note that these spokes do not come with nipples. Please order 14G nipples separately if they are required.
Pillar’s PSR Wing spokes are an aerodynamic performance spoke made with high quality T302+ stainless steel. The distinctive shape of the spoke’s mid-section is inspired by aircraft nose cones, and is designed to reduce turbulence and drag as the spoke moves through the air stream.
A unique feature of Pillar’s PSR spokes is the increased diameter of the spoke elbow to 2.2 mm. This increase in cross-sectional area improves strength at the elbow and allows for a tighter fit at the hub flange.
Note on use:
Please note that a bladed spoke holding tool is required to work with these spokes. DT Swiss’ 1.0-1.3 mm bladed spoke holder is a good choice for these spokes.
Product details
Colour: Black
Material: T302+ Stainless Steel
Thread gauge: 14 gauge
Diameter along the spoke: 2.2 mm - 2.1x1.3 mm – 2.0 mm
Thread pitch: 56 TPI, 14G
Type: J-Bend
Please note that these spokes do not come with nipples. Please order 14G nipples separately if they are required.
Pillar’s PSR Wing spokes are an aerodynamic performance spoke made with high quality T302+ stainless steel. The distinctive shape of the spoke’s mid-section is inspired by aircraft nose cones, and is designed to reduce turbulence and drag as the spoke moves through the air stream.
A unique feature of Pillar’s PSR spokes is the increased diameter of the spoke elbow to 2.2 mm. This increase in cross-sectional area improves strength at the elbow and allows for a tighter fit at the hub flange.
Note on use:
Please note that a bladed spoke holding tool is required to work with these spokes. DT Swiss’ 1.0-1.3 mm bladed spoke holder is a good choice for these spokes.
Product details
Colour: Black
Material: T302+ Stainless Steel
Thread gauge: 14 gauge
Diameter along the spoke: 2.2 mm - 2.1x1.3 mm – 2.0 mm
Thread pitch: 56 TPI, 14G
Type: J-Bend
Please note that these spokes do not come with nipples. Please order 14G nipples separately if they are required.